Utmost care should be given while dealing with MCD supplied to Branch Post Office. As per company specification following are the main Do’s and Don’ts for the trouble-free operation of MCD.
Do's
1. Place finger exactly on 'Scanning Area" of finger print device.
2. Use Power switch to turn ON and shut down machine.
3. Every day charge Battery Minimum 5Hrs for full backup.
4. If terminal is daily not used, terminal needs to be charged at least once in 2-3 days compulsory to arrest any battery dead issues.
5. In switch off mode also, one can charge the battery like mobile hand set.
6. Handle with care printer for paper roll change/paper feeding.
7. Insert paper roll in forward direction, if paper is inserted reversely, white print out will generate.
8. Lock the printer cabinet properly after placing paper roll.
9. Power off unit, if unit is not in use
10. Take Proper care for threading and nu -threading of Antenna while fixing antenna.
11. Connect/Disconnect Pin -pad USB connector at unit switch -off condition.
12. Use Specified/Quality paper roll for printing, as per specification.
13. Use Specified Adapter for battery charging.
14. Connect / Disconnect the Antenna at unit switch -off condition.
15. Place SIM card in SIM slot when terminal is in switch off condition. SIM Slot given for 2 SIM
16. insert option (Lower is SIM2 and Upper Slot is SIM1).
17. Finger Print Scanner is given for biometric use, need to use carefully.
18. For LCD touch styles to be used.
Don 'ts
1. Do not use liquid or aerosol cleaners for cleaning.
2. Do not dissemble or modify MCD terminal.
3. Do not open battery cover of MCD terminal during operation.
4. Do not expose the terminal to metal particles, water, dust etc.
5. Do not yank the power cord or place anything on the power cord.
6. Do not pull the power plug with wet hands.
7. Do not short or tamper with battery pack gold contact tabs during handling.
8. Do not try to charge the battery on external chargers.
9. Do not tamper or remove any stickers on the VISIONTEK-GL11 MCD terminal, it may void
10. the warranty on the unit and 'weaken tamper detection.
11. Do not connect ANTENNA after switching ON the MCD terminal.
12. Do not remove the SIM cards in unit ON condition.
13. Finger Print Scanner is given for biometric use, please use carefully; don't touch with pens /
14. metal or don't clean with liquids etc.
15. For LCD touch, dont use pen, Pencil or screw drivers, by using the same LCD will damage.
16. Before using the MCD terminal, Please remove the LCD sticker.
17. Don't interchange the batteries. Each model uses different configuration batteries.
18. Do not disassemble or modify the MCD unit.
19. Do not remove battery of MCD terminal during operation.
20. Do not expose the terminal to metal particles.
21. Do not yank the power cord or place anything on the power cord.
22. Never install MCD terminal in the following places:
a. 1: Exposed to direct sunlight, moist, hot or dusty
b. 2 Unstable or vibrating places
c. 3.Near flammable liquid or gas
d. 4.Near large appliances Viz. AC, Fridge etc.
e. 5.Near electric apparatus such as radios and TVs
f. 6 Near magnetic bodies such as audio speakers
23. Do not pull power plug with wet hands.
24. Do not short or tamper with battery pack gold contact tabs during handling.
25. Do not try to charge the battery on other chargers.
26. Do not expose to the rain (or) water.
27. Do not throw the batteries into the dust bins, fire and in open areas. please dispose them in environment friendly manner.
Note: Do not tamper or remove any stickers on the MCD terminal. It may void the warranty on the unit and weaken tamper detection:
Post a Comment